Cabinet Door Clamping System
A build-your-own cabinet door clamping station. We have developed a cost effective system with the necessary pneumatic clamps, hoses, fittings, and parts needed to create your own cabinet door clamping station.
The V 2.0 offers increased functionality and performance with updated features like
Self locking pegs
New Ergonomic Design
Built in Handle
This system is adaptable and expandable. start out with a pair of clamps and keep adding on!
In order to complete the system you’ll only need the following:
A table with a grid of holes for the clamps to sit in (Scroll down on this page to see a list of recommended CNC partners and their locations)
Standard air hose connection to tie into your shop air hose (your local hardware store will definitely have this in stock, 1/4 NPT threads)
Whether you are in a big woodworking shop, or just working out of a small space in your garage. This clamping system can be adapted to any space, and runs off of any compressed air system typically used in shops.
For more detailed information and helpful videos on how to setup and use this clamping system please check our BLOG post
A build-your-own cabinet door clamping station. We have developed a cost effective system with the necessary pneumatic clamps, hoses, fittings, and parts needed to create your own cabinet door clamping station.
The V 2.0 offers increased functionality and performance with updated features like
Self locking pegs
New Ergonomic Design
Built in Handle
This system is adaptable and expandable. start out with a pair of clamps and keep adding on!
In order to complete the system you’ll only need the following:
A table with a grid of holes for the clamps to sit in (Scroll down on this page to see a list of recommended CNC partners and their locations)
Standard air hose connection to tie into your shop air hose (your local hardware store will definitely have this in stock, 1/4 NPT threads)
Whether you are in a big woodworking shop, or just working out of a small space in your garage. This clamping system can be adapted to any space, and runs off of any compressed air system typically used in shops.
For more detailed information and helpful videos on how to setup and use this clamping system please check our BLOG post
A build-your-own cabinet door clamping station. We have developed a cost effective system with the necessary pneumatic clamps, hoses, fittings, and parts needed to create your own cabinet door clamping station.
The V 2.0 offers increased functionality and performance with updated features like
Self locking pegs
New Ergonomic Design
Built in Handle
This system is adaptable and expandable. start out with a pair of clamps and keep adding on!
In order to complete the system you’ll only need the following:
A table with a grid of holes for the clamps to sit in (Scroll down on this page to see a list of recommended CNC partners and their locations)
Standard air hose connection to tie into your shop air hose (your local hardware store will definitely have this in stock, 1/4 NPT threads)
Whether you are in a big woodworking shop, or just working out of a small space in your garage. This clamping system can be adapted to any space, and runs off of any compressed air system typically used in shops.
For more detailed information and helpful videos on how to setup and use this clamping system please check our BLOG post
Starter Kit - 1 Regulator/filter, 2 fully assembled Clamps with switches, 18’ pneumatic hose, 2 Tee Fittings, 1 End Cap
Clamps X2 -2 fully assembled Clamps, 2 Tee Fittings, 12’ Pneumatic hose, 1 End cap
Replacement parts - Please Email support@thevacpad.com to order replacement parts to upgrade from the original Cabinet Clamping System
Specifications for the table:
3/4 thick sheet material (recommend domestic double sided UV plywood for stability)
Hole configuration is 20mm diameter holes, at 48mm on center.
Lay that pattern across a whole sheet as large as you like for your shop.
Recommended CNC Shop Partners
Below is a list of Shops around the USA that have the CNC capability for machining your peg board table. We can only provide basic contact information to help you reach out. Each shop has their own rates for their time, you must contact them for their pricing information directly.
James (Fourth Generation Craftsman)
Gilbert, AZ - Fourthgenerationcraftsman@gmail.com - 480.861.9372
Tim (True trade Carpentry)
Hackettstown, NJ - Truetradecarpentry@icloud.com - 908.223.1388
Jared (JLW Innovation)
Carthage, MO - jared@cncdesign.us / Jared Wilkinson - 417.793.1219
Marcus (Stromburg Built ,LLC)
Buffalo, MN - marcus@strombergbuilt.com - 612.812.5800
Tony (TS Carpentry)
Golden, CO - Tony@tscarpentry.com - 303.478.4355
Justin (Rustic Grain Design)
Tampa, FL - Info@rusticgraindesigns.com - 813.356.8594
Oscar (Pastence Custom Woodwork and Design)
Glenview, IL - Info@pastence.net
Ingenious Design & Construction
Torrance, CA - igdesignla@gmail.com
Adamski Fine Woodworking
Tampa, FL - Adamskifinewoodworking@gmail.com
Ryan Smythe
Rifle, CO - fabricator@westslopecnc.com - 970.274.0518
Cliff Williams
Wichita, KS - cw@homelandcs.com - 316.304.8329
David Whitley (Beveled Timber Custom Woodwork)
Hartland, WI - Beveledtimber@gmail.com
Dave Nichols
Evansdale, IA - nicholsconstruction1@gmail.com - 319.234.2275
Cameron Pile
Charlottesville, VA - cameron@roarkstudio.com
Ben Haug
Youngstown, OH - Haugcabinetdesign@gmail.com - 330.727.4804
Kevin Lamb
Natick, MA - klamb@buildstillwater.com - 508.725.7572
Erwin Kershaw
Medicine Hat, Alberta Canada - elwinkershaw@gmail.com - 403.979.1337
Trevor Pappas
Santa Rosa, CA. - pappaswoodworks@gmail.com - 707.230.2052
Alex Preece
Nottingham, UK - alex@jamesrosebespoke.co.uk - +447889237461
Steven Ward
Edmond, OK - Steven@TheRoyalOakie.com - 405.896.5770
Ben Barnes
Jay, OK - ben@barneswoodwork.com - 918.837.0540
James Black ( James Black Stag Boards LLC )
St Clair, MI - Stagboardsllc@gmail.com - 989.387.9713
Nate Iverson
St. Louis Park, MN. - info@iversonhardwoods.com - 612.492.1767
This List is always getting updated. If you have a CNC and would like to be a part of our Recommended CNC partners please email us by clicking the signup button below
